Macro Sensors spring-loaded, loop powered LVDTs are designed for a wide range of position measurement and dimensional gaging applications. (read more)

The Macro Sensors GHSE 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a sealed axial connector; the mating connector plug is supplied with a unit. (read more)

THIS MODEL DIRECTLY REPLACES THE LVC-2412 SIGNAL CONDITIONER. The Macro Sensors LVC-2500 is a single channel signal conditioner that operates on 12 or 24 Volts DC power to support any standard LVDT, RVDTs, and VRT half-bridges. Designed expressly for use with 24VDC systems with PLCs and mini-PLCs or on 12VDC for use in mobile and vehicular testing systems, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or... (read more)

The Macro Sensors GHSER 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. Electrical termination is through a radially mounted sealed connector, which results in a much reduced installed length. (read more)

Macro Sensors’ SE 750 Series of 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the added convenience and simplicity of DC input and precalibrated DC output. They are designed to operate in conjunction with PLCs, digital indicators, ... (read more)

The DMI-D1 Series DC LVDT Indicator is an accurate, high performance, programmable single channel DC LVDT indicator that delivers precise measurement for applications using DC LVDT (Linear Variable Differential Transformer) inputs. The 5-digit alphanumeric LED display provides easy to follow setup prompts for all LVDT parameters using the intuitive text configuration menus. (read more)

The DMC-D2 Series DC LVDT Controller is an accurate, high performance, programmable dual channel controller that delivers precise measurement and control for applications using DC LVDT (Linear Variable Differential Transformer) inputs. The 6-digit alphanumeric LED display provides easy to follow setup prompts for all DC LVDT parameters using the intuitive scrolling text configuration menus. (read more)

Macro Sensors GHSA 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68. (read more)

The Macro Sensors GHSAR 750 Series of 3/4 inch diameter spring-loaded AC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The ... (read more)

The BBP/BBT Series Precision Gaging Probes are available in either .375 " [9.5 mm] or .315" [8 mm] body diameters. Utilizing linear ball-bearing assemblies, these LVDTs provide exceptional repeatability and long service life. • Ranges of ±0.04" [±1.0 mm] to ±0.20" [±5.0 mm] • ... (read more)

DMI-A1 Indicator is an accurate, high performance, programmable single channel LVDT indicator that delivers precise measurement for applications using LVDT (Linear Variable Differential Transformer) inputs. The 5-digit alphanumeric LED display provides easy to follow setup prompts for all LVDT parameters using the intuitive text configuration menus (read more).

The DMC-A2 LVDT Controller/Indicator is an accurate, high performance, programmable dual channel controller that delivers precise measurement and control for applications using LVDTs (Linear Variable Differential Transformer) inputs. The 6-digit alphanumeric LED display provides easy to follow setup prompts for all LVDT parameters using the following intuitive scrolling text configuration menus. (read more)

Macro Sensors’ HSA 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are sealed... (read more)

Macro Sensors’ HSAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are seale... (read more)

Macro Sensors’ HLR 750 Series of 3/4 inch diameter high reliability LVDT position sensors are specifically designed for use in gas turbine environments. Rated for operation to 300°F (150°C), these hermetically sealed AC-LVDTs are listed for Class I, Division 2, Groups A, B, C, D and Class I, Zone 2,... (read more)

The Macro Sensors SQ 1250 Series Heavy Duty LVDTs were developed specifically to measure position or motion in mill-type hostile environments. These rugged and reliable contactless sensors, available in measuring ranges from ±0.50 inches to ±10.00 inches, have their electrical assembly totally en... (read more)

The HSI 750 Series of loop-powered 4-20 mA sourcing LVDT position transmitters is offered in measuring ranges of 1 to 10 inches (25 to 250 mm) to provide reliable, contactless position monitoring and feedback of control valves and servo actuators. They are rugged and robust devices constructed entirely of TI... (read more)

The HSIR 750series of loop-powered 4-20 mA sourcing LVDT position transmitters (read more)

Macro Sensors’ CD 375 Series of 3/8 inch (9.5 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. They are available in full scale measuring ranges from ±0.025 inch (±0.63 mm) to ±2.0 inches (±50 mm) and offer 50% larger core-to-b... (read more)

Macro Sensors’ PR 750 Series of 3/4 inch (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements. They are available in full scale measuring ranges from ±0.050 inch (±1.25 mm) to ±10 inches (±250 mm) and offer a c... (read more)

Macro Sensors' PRH 812 Series of AC-LVDTs are 0.812 inch (20.6 mm) diameter general-purpose LVDT linear position sensors that feature larger core-to-bore clearance than the standard PR 750 Series of AC-LVDTs. They were designed primarily for use in legacy OEM applications, and are cost-effective exact replacement LVDTs that offer the same form, fit, and function as competitors' products of the same size and range. (read more)

The Macro Sensors GHSD 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The c... (read more)

The Macro Sensors GHSDR 750 Series of 3/4 inch diameter spring-loaded DC-LVDTs are designed for a wide range of position measurement and dimensional gaging applications. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The ... (read more)

Macro Sensors’ DC 750 Series of 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the added convenience and si... (read more)

Macro Sensors’ HSD 750 Series of 3/4 inch (19 mm) diameter DC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are sealed... (read more)

Macro Sensors’ HSDR 750 Series of 3/4 inch (19 mm) diameter DC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are seale... (read more)

The GSA 750 Series of short range spring loaded position sensors were developed for cost sensitive applications requiring LVDT reliability and performance. Available in ranges of ±0.10 inches to ±0.30 inches, these sensors offer the excellent measurement capabilities of an LVDT at very economical pr... (read more)

The Macro Sensors R 1380-050 RVDTs are a series of contactless, fractional-turn, absolute output rotary position sensors that provide an analog voltage or current output proportional to shaft rotation over a total range of 100°. They are ideal sensors for measuring the position of quarter-turn ball and but... (read more)