Macro Sensors’ HSA 750 Series of 3/4 inch (19 mm) diameter AC-Operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68 and electrical termination is through a sealed axial connector. The mating connector plug is supplied with the unit. [read more]

The HSTA 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F) or exposed to mild radiation (3x107 Rads for 40 years). The coil windings are sealed against hostile environments to IEC standard IP-68 and electrical termination is through a sealed axial connector. The mating connector plug is .... [read more]

Macro Sensors’ HSAR 750 Series of 3/4 inch (19 mm) diameter AC-Operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. The coil windings are sealed against hostile environments to IEC standard IP-68 and electrical termination is through a sealed radial connector located near one end. The mating connector plug is supplied with the unit. [read more]

The HSTAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs is designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F) or exposed to mild radiation (3x107 Rads for 40 years). The coil windings are sealed against hostile environments to IEC standard ... [read more]

The Macro Sensors BBP family of 8 mm diameter pencil-type gaging probes offers ultra-precise measurement of dimensions in a wide variety of Q.C., SPC, and industrial metrology applications. They utilize a linear ball bearing assembly precisely fitted to a hardened-and-ground, non-rotating probe shaft to minimize radial play and the effects of side loading. This results in the probes' exceptional repeatability of 0.000006 inch (0.15 µm). [read more]

Macro Sensors’ CD 375 Series of 3/8 inch (9.5 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. They are available in full scale measuring ranges from ±0.025 inch (±0.63 mm) to ±2.0 inches (±50 mm) and offer 50% larger core-to-bore radial clearance, 0.012 inches (0.3 mm), than similar size units from competitors. [read more]

Macro Sensors’ PR 750 Series of 3/4 inch (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements. They are available in full scale measuring ranges from ±0.050 inch (±1.25 mm) to ±10 inches (±250 mm) and offer a core-to-bore radial clearance of 0.031 inches (0.25 mm) with the standard core supplied. [read more]

Macro Sensors’ PR 812 Series of AC-Operated LVDTs are 0.812 inch (20.6 mm) diameter versions of the PR 750 Series of general purpose LVDT linear position sensors. They were designed primarily for use in legacy OEM applications and are not recommended for new designs. In most applications they are a cost effective form, fit, and function replacement LVDT for an OEM or user employing a competitor’s products of similar size and range. [read more]

Macro Sensors’ PRH 812 Series AC-Operated LVDTs are 0.812 inch (20.6 mm) diameter versions of the PR 750 Series of general purpose LVDT linear position sensors. They were designed primarily for use in legacy OEM applications and are not recommended for new designs. In most applications they are a cost effective form, fit, and function replacement LVDT for an OEM or user employing a competitor’s products of similar size and range. [read more]

The DMC-A2 is an accurate, high performance, programmable dual channel controller that delivers precise measurement and control for applications using LVDT (Linear Variable Differential Transformer) inputs. The 6-digit alphanumeric LED display provides easy to follow setup prompts for all LVDT parameters using the intuitive scrolling text configuration menus. [read more]

The DMI-A1 is an accurate, high performance, programmable single channel LVDT indicator that delivers precise measurement for applications using LVDT (Linear Variable Differential Transformer) inputs. The 5-digit alphanumeric LED display provides easy to follow setup prompts for all LVDT parameters using the intuitive text configuration menus. [read more]

THIS MODEL DIRECTLY REPLACES THE LVC-2412 LVDT SIGNAL CONDITIONER.

The Macro Sensors LVC-2500 Signal Conditioner is a single channel signal conditioner that operates on 12 or 24 Volts DC power to support standard LVDT, RVDT, and VRT half-bridge sensors. Designed expressly for use in 24 Volt systems with PLCs and mini-PLCs, or in 12 Volt mobile and vehicular testing systems, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA (sourcing) current loop in a 3-wire common ground system in which the power ground is connected to the output signal's ground. [read more]

Prepared by Harold Schaevitz

1. Free core LVDT used in R&D of suspension performance and profiling (linear travel)
2. Free core LVDT used for shock absorber performance and profiling of characteristics
3. Spring loaded and free core LVDTs used for Throttle position
4. Free core LVDT used for monitoring steering position in static test environment
5. Free core LVDTs used in active suspension systems
6. Free core LVDT used in manual and automatic transmission for gear indication (Linear displacement)