Macro Sensors LVDT Press Release

Intelligent Digital LVDT Controllers & Indicators Simplify Set-Up in Diverse Applications

Pennsauken, NJ, September 9, 2005...Macro Sensors, (www.macrosensors.com), an American Sensor Technologies (AST) company specializing in the manufacture of LVDT-based linear and rotary sensors, gaging probes, support electronics and related instrumentation, introduces a new family of economically-priced and user-friendly digital controllers and indicators that delivers precise measurement for applications using AC- and DC-LVDT (Linear Variable Differential Transformer) inputs.

Designed especially to optimize the use of LVDTs in automation, process or lab applications, the Series DMI Single Channel LVDT Indicators offer user-friendly set-up with a scrolling display that actively prompts users for all LVDT parameters. A 5-digit alphanumeric display, which can be calibrated in any engineering units, offers readout down to 1/10,000 inch. Units offer four programmable setpoints with alarm status annunciator LEDs. With the Series DMI Indicators, R&D staff, factory automation personnel and other technicians can easily set up and monitor the functionality of plant controllers and indicators without engineering assistance.

Designed to drive and condition the signal from an LVDT transducer, the Series DMI Single Channel LVDT Indicators contain two high-speed micro controllers and a 16-bit A/D converter that has over 130 dB noise rejection at the excitation frequencies and is capable of 40 Hz averaged output on 45 samples. Scrolling text menus provide quick access to a range of configuration modes for easy application setup.

LVDT sensors used with the Series DMI Single Channel LVDT Indicators can be applied in almost all engineering applications covering civil, mechanical, petrochemical, power generation, production, aerospace, defense, and much more. They can be used on production lines to automatically gauge products for quality control and product sorting. In the power generation and petrochemical industries they can be used, for example, as servo position feedback on actuated equipment such as valves and dampers, or for measuring turbine casing expansion. Submersible units can be used in marine and offshore mining applications.

Macro Sensors offers its digital LVDT controllers in both AC- and DC-versions including:

The DMI-A1 Series AC LVDT Indicator utilizes one of its two micro controllers to generate the sine wave for the AC LVDT excitation frequency. These frequencies are produced as multiples of the line frequency (either 50 Hz or 60 Hz that are selectable via the scrolling text menus). Units provide a high-speed 10V scalable analog output without recalibration and built-in excitation to properly power any standard AC-LVDT.
The DMI-DI Series DC LVDT Indicator communicates with the selected controller internally via the .2C data bus. Units offer a 10V scalable analog output without recalibration and built-in 24V DC to power virtually any DC-LVDT

Macro Sensors' Series DMI Signal Channel LVDT Indicators are economically priced at about one-third lower than competitive LVDT dedicated units. For additional information, please contact Eileen Otto at 856-662-8000/email: sales@macrosensors.com or visit our web site at www.macrosensors.com.

About Macro Sensors

Macro Sensors' extensive line of LVDT-based linear and rotary sensors are used for linear position measurement and feedback in a variety of industrial applications including factory automation, motion control systems, metal fabricating, automotive assembly as well as power plants, gas/steam turbines. Incorporated in 1994, the Company offers more than 200 years of cumulative design and manufacturing experience by its key staff in serving its OEM and end-user international customer base. On June 1, 2005, Macro Sensors was acquired by AST, manufacturer of state-of-the-art (Micro Electro Mechanical Structures) MEMS-based pressure sensors, transducers, and transmitters. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration, oil & gas exploration/production, and off-road vehicles. For more information on AST products and technology, visit the AST website at www.astsensors.com.

Contacts:

Engineering:
Ed Herceg
USA
Phone: 856-662-8000

General Information:
Eileen Otto
USA
Phone: 856-662-8000

---------------------------------------------------------------------------
Company Information:
Name: Macro Sensors
Address: 7300 US Route 130 North, Bldg. 22
City: Pennsauken
State: NJ
ZIP: 08110 1334
Country: USA
Phone: 856-662-8000
FAX: 856-317-1005
http://www.macrosensors.com



Press Release:	Digital Controllers and Indicators optimize use of LVDTs March 21, 2005 - DMC-A2 AC and DMC-D2 DC Controllers feature internal signal conditioning to provide proper voltage for operating LVDTs. With 4 programmable setpoints and 8 selectable functions, microprocessor-based logic provides digital position indication, linearization and cross-channel math functions, input averaging, digital filtering, and hi/low limit detection. RS-232 communications port is standard for remote software setup, and optional TCP/IP network capability is available.
The story @ news.thomasnet.com	Press Release Release date: September 9, 2005
	Intelligent Digital LVDT Controllers & Indicators Simplify Set-Up in Diverse Applications Pennsauken, NJ, September 9, 2005...Macro Sensors, (www.macrosensors.com), an American Sensor Technologies (AST) company specializing in the manufacture of LVDT-based linear and rotary sensors, gaging probes, support electronics and related instrumentation, introduces a new family of economically-priced and user-friendly digital controllers and indicators that delivers precise measurement for applications using AC- and DC-LVDT (Linear Variable Differential Transformer) inputs. Designed especially to optimize the use of LVDTs in automation, process or lab applications, the Series DMI Single Channel LVDT Indicators offer user-friendly set-up with a scrolling display that actively prompts users for all LVDT parameters. A 5-digit alphanumeric display, which can be calibrated in any engineering units, offers readout down to 1/10,000 inch. Units offer four programmable setpoints with alarm status annunciator LEDs. With the Series DMI Indicators, R&D staff, factory automation personnel and other technicians can easily set up and monitor the functionality of plant controllers and indicators without engineering assistance. Designed to drive and condition the signal from an LVDT transducer, the Series DMI Single Channel LVDT Indicators contain two high-speed micro controllers and a 16-bit A/D converter that has over 130 dB noise rejection at the excitation frequencies and is capable of 40 Hz averaged output on 45 samples. Scrolling text menus provide quick access to a range of configuration modes for easy application setup. LVDT sensors used with the Series DMI Single Channel LVDT Indicators can be applied in almost all engineering applications covering civil, mechanical, petrochemical, power generation, production, aerospace, defense, and much more. They can be used on production lines to automatically gauge products for quality control and product sorting. In the power generation and petrochemical industries they can be used, for example, as servo position feedback on actuated equipment such as valves and dampers, or for measuring turbine casing expansion. Submersible units can be used in marine and offshore mining applications. Macro Sensors offers its digital LVDT controllers in both AC- and DC-versions including: The DMI-A1 Series AC LVDT Indicator utilizes one of its two micro controllers to generate the sine wave for the AC LVDT excitation frequency. These frequencies are produced as multiples of the line frequency (either 50 Hz or 60 Hz that are selectable via the scrolling text menus). Units provide a high-speed 10V scalable analog output without recalibration and built-in excitation to properly power any standard AC-LVDT. The DMI-DI Series DC LVDT Indicator communicates with the selected controller internally via the .2C data bus. Units offer a 10V scalable analog output without recalibration and built-in 24V DC to power virtually any DC-LVDT Macro Sensors' Series DMI Signal Channel LVDT Indicators are economically priced at about one-third lower than competitive LVDT dedicated units. For additional information, please contact Eileen Otto at 856-662-8000/email: sales@macrosensors.com or visit our web site at www.macrosensors.com. About Macro Sensors Macro Sensors' extensive line of LVDT-based linear and rotary sensors are used for linear position measurement and feedback in a variety of industrial applications including factory automation, motion control systems, metal fabricating, automotive assembly as well as power plants, gas/steam turbines. Incorporated in 1994, the Company offers more than 200 years of cumulative design and manufacturing experience by its key staff in serving its OEM and end-user international customer base. On June 1, 2005, Macro Sensors was acquired by AST, manufacturer of state-of-the-art (Micro Electro Mechanical Structures) MEMS-based pressure sensors, transducers, and transmitters. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration, oil & gas exploration/production, and off-road vehicles. For more information on AST products and technology, visit the AST website at www.astsensors.com. Contacts: Engineering: Ed Herceg USA Phone: 856-662-8000 General Information: Eileen Otto USA Phone: 856-662-8000 --------------------------------------------------------------------------- Company Information: Name: Macro Sensors Address: 7300 US Route 130 North, Bldg. 22 City: Pennsauken State: NJ ZIP: 08110 1334 Country: USA Phone: 856-662-8000 FAX: 856-317-1005 http://www.macrosensors.com