AST Macro Sensors Logo

    856-662-8000

  sales@macrosensors.com

Signal Conditioners and Meters
AC LVDT Signal Conditioner icon
AC LVDT Signal Conditioner icon
LVDT / RVDT Signal Conditioner
Push Button AC LVDT Signal Conditioner
Low Cost LVDT Signal Conditioner

LVDT / RVDT Signal Conditioner -
EAZY-CAL™ LVC-4000

The EAZY-CAL™ LVC-4000 is a standalone signal conditioner, supporting a wide range of AC LVDTs, RVDTs, and VR half-bridges, while providing several choices of voltage, current, and digital RS-485 outputs. Push-button calibration offers intuitive operation as compared to signal conditioners with span and offset trim pots. Fault conditions are indicated by blinking LEDs...
  • Push-button or RS-485 command auto-calibration
  • Analog voltage or current loop output
  • Digital RS-485 interface
  • Supports all standard AC LVDTs, RVDTs, and VR half-bridge sensors
  • Master/slave excitation synchronization
  • DIN-rail mountable

Mini-Module Signal Conditioner -
EAZY-CAL™ MMX Series

The Macro Sensors EAZY-CAL™ MMX Series is a single channel signal conditioner that operates on a nominal 15-30V DC power input and provides a low noise 0-10V DC output or 4-20 mA output. It can be remotely located by up to 100+ feet to facilitate LVDT operation in extreme environments. Employing a virtually effortless fingertip calibration routine, the EAZY-CAL™ saves time and money.
  • Pushbutton calibration in seconds
  • Nominal 15-30V DC input,
    0-10V DC or 4-20 mA output
  • DIN-rail mountable high impact / flame retardant mini-module housing
  • Operating range of 32-160 °F
  • Master/slave excitation synchronization

Signal Conditioners for AC LVDTs -
LVC-2500

The Macro Sensors LVC-2500 is a single channel signal conditioner that operates on 10-30 Volts DC power to support standard LVDT, RVDT, and VRT half-bridge sensors. Designed expressly for use in 24 Volt systems with PLCs and mini-PLCs, or in 12 Volt mobile and vehicular testing systems, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA.
  • 10-30 V DC operation
  • Outputs of 0 to 10 V DC,
    0 to ±10 V DC, or 4-20 mA
  • DIN rail mounting
  • Adjustable span and zero
  • User selectable gain and excitation frequencies
  • Synchronizable oscillator